Printer MAC address MAC address (Media Access Control address) is a quasi-unique identifier consists of a six byte number that attached to most network adapter card or network interface card (NIC). As such, all network cards, whether it’s of Ethernet NIC, Gigabit Ethernet NIC or wireless 802.11a/b/g/n WiFi or HiperLAN adapter, should have different MAC addresses, which also known as Ethernet Hardware Address (EHA) or adapter address. Sometimes it is needed to know the printer MAC address. To access the Registered network, the MAC address of printer must be registered with the network as a form of authentication.

Bellow is how to get printer MAC address step by step. Check your printer manual. This is the easiest and fastest way to find the printer's MAC address.

Print out a configuration page. Sometimes the test page and the configuration page are the same. Print them from the printer front panel or from the computer. The front panel of the printer will likely have a configuration or tool button. Press it and scroll using the arrow keys to 'Print Test Page,' then select 'OK'. To print from the computer, navigate to the printer and right-click.

Select 'Properties' and choose 'Print Test Page.' . Locate the printer MAC address on the configuration page. It is 12 digits and can be alternatively labeled the 'physical address.' If the printer MAC address is not listed, find the IP address and continue to Step 4.

Fillable Online Sfu Wireless Printing For Mac

Open the command prompt by clicking 'Start' and typing 'CMD' in the 'Run' line. Type in the following command: ping 0.0.0.0 (IP address).

Look for the physical (MAC) address in the output that follows.

You are here: Hold/release queues & Print Release Stations Hold/release queues & Print Release Stations In a standard network printing environment, when a user prints from an application, the job is sent directly to the printer and starts printing immediately. In some environments it might be advantageous to place the job in a holding state prior to printing. Some common examples include:. Secure printing—In a secure printing environment jobs are only printed when the user arrives at the print area and confirms his or her identity. This ensures the user is there to collect the job and other users can't 'accidentally' collect the document. Approved printing—In some organizations it might be appropriate to hold jobs until they are approved by selected individuals.

A good example would be a teacher approving printing on an expensive color printer. Authentication—use hold/release queues as a form of authentication in an unauthenticated environment. Users must authenticate prior to releasing their jobs allowing PaperCut NG/MF to confirm their identity. PaperCut NG/MF provides the framework and software interface to implement hold and release queues. Users can interact with the hold/release queues (e.g. Release their jobs) in a number of ways. This normally takes the form of a - a dedicated computer terminal located next to the printers, however, other interaction methods include access via a browser-based interface.

Hold/release queues are used for a wide variety of purposes depending on the requirements of the organization. The simplest way to get started with hold/release queues is to read through the, and decide which best suits your needs. These scenarios outline the steps required to configure and manage a queue.